Publicidad
Idiomas disponibles
Idiomas disponibles
Unpacking
Your Refrigerator
I, Remove allpackaging mateFial. This includesthe foam base and all
adhesive tape holding the refrigerator a ccessoriesinsideand
outside, Slide out and remove plastic or foam guard used to
secure the compressor from shipping damage
due to vibration
and shock.
2, Inspectand remove any remains of packing, tape or printed
materialsbefore powering on the refrigerator,
Proper Air Circulation
• To assure your refrigerator
works at the maximum
efficiency
it
was designed
for, you should install it in a location
where there
is proper
air circulation,
plumbing
and electrical
connections,
• The following
are recommended
clearances
around
the refrigerator:
Sides ...............
3/4
"(19mm)
Top ....................
2" (50mm)
Back ..................
2" (50ram)
Publicidad
