•
Report levels
Each stored contact can have its own report level set. Three levels
(Normal, Extended, All Details) indicate how many events are
reported to the contact.
The extended level of reporting is assigned only to the first enrolled
contact, all additional contacts are set to normal level.
The EYE-02 camera can also report all events to Alarm Receiving Centre run by a security agency. Reports are
created in accordance with international standard communication protocols. Protocol settings will be made by the
authorized ARC service provider once you subscribe to their service.
•
Report format
By default, the camera sends an alarm report as an MMS and makes a call to all enrolled contacts. For normal opera-
tion there must be minimum of 1 contact enrolled in the camera.
•
Editing contacts
The easiest way of editing contacts is via the JabloTool software. For remote editing of contacts, use the JabloTool
web interface and create account on www.jablotool.com. JabloTool allows you to simply edit the numbers or e-mail
ad-dresses and completely customise what events will be reported at which reporting level.
Alternatively, new telephone contact can be added by calling the EYE-02 camera from the telephone number you
wish to add while the camera is in the ENROLL mode. New contacts can also be added via an SMS command (see
chapter 4.3)
The camera sends e-mails with the reply address noreply@eye-02.info. Please change your e-mail
client SPAM filter to accept e-mails from this address.
Think about who should be sent the alarm information. In the case of remote location, it is useful to
add someone who is physically close to the camera (neighbours, security agency etc.).
3.8 Security settings
It is possible to use two passwords to protect your camera. To set or change the passwords, use JabloTool or SMS
commands (chapter 4.3).
If a password is not used, the camera processes incoming SMS messages only from phone numbers stored in
contacts. Camera always receives calls only from telephone numbers stored in its contact list. (See chapter 4.4. Call
EN
Control)
•
Remote Access Password
This password protects you against any unahthorized access to your camera (SMS, JabloTool). It is set to 0000
ES
by default.
If it is used, the camera only processes SMS messages that begin with the password from any phone number.
•
Configuration Password
DE
This password protects the camera configuration. (The contacts are not part of the configuration.) This password is
not set by default.
If it is used, the camera only processes SMS messages that begin with the password from any phone number.
FR
The passwords can contain 4-31 characters; the permitted symbols are 0..9, a..z, A..Z. The
passwords are not case sensitive. You can also use JabloTool web interface on www.jablotool.com to
configure your passwords.
NO
FI
EYE-02.ENG.MAN.User_Manual.23.C
REPORT LEVELS
NORMAL
EXTENDED
ALL DETAILS
- 10 -
STATUS
ALARMS
PROBLEMS
CHANGES
_
_
_