Descargar Imprimir esta página

Publicidad

Enlaces rápidos

Model #
598KFDW1
Crescent Dresser
Assembly Instructions
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
Unload items from this unit prior to moving.
Do not overload drawers on this unit.
For maximum stability, attach unit to the wall
using the enclosed hardware as per instructions.
Presented by Whittier Wood Products
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
We will replace any
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter/number, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place;
3) in temperatures ranging from 40° to 90°.
(Not on a cold, possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
Rev. 10/05

Publicidad

loading

Resumen de contenidos para Chaparral Crescent 598KFDW1

  • Página 1 Model # 598KFDW1 Crescent Dresser Assembly Instructions Service Policy: We will replace any parts which are defective, missing or damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts. Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
  • Página 2 598KFDW1 Crescent Dresser — Parts List BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on the parts list. 1 — Top — Qty. 1 2 — Back — Qty. 2 3 — Left Side — Qty. 1 4 —...
  • Página 3 598KFDW1 — Parts List (Cont.) 11 — Small Drawer 12— Large Drawer 13 — Small Drawer 14 — Small Drawer End — Qty. 1 End — Qty. 3 Left Side Right Side — Qty. 1 — Qty. 1 15 — Large Drawer Left 16 —...
  • Página 4 ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Phillips Screwdriver, Mallet or Padded Hammer, Wood Glue, Tape Measure STEP 1 x 18 Glue three Dowels (E) into top edge of both Sides (3 & 4). Glue two Dowels (E) into each end of Sleepers (5 & 6 & 17). STEP 2 Glue Rear Sleeper (6) to Left Side (3) with pocket drilled hole to the back and fasten in place with a 4x40mm Phillips Pan Head Screw (B).
  • Página 5 STEP 3 Attach the Right Side (4) in the same way. STEP 4 4. Slide Top (01) down over the dowels in the top of the sides. Fasten in place with 4x35mm Phillips Pan Head Screws (F) through the predrilled holes in cleats on sides and front sleeper.
  • Página 6 STEP 5 Attach Backs (2) with Back Channel (7) between them using 3x16mm Phillips Screws (D) in the predrilled holes in the backs. STEP 6 6. Attach Large Drawer Sides (15 & 16), with slide wheels to the rear and grooves for drawer bottom aligned, to the Large Drawer Face (8) with 3.5x30mm Phillips Pan Head Screws (C) through the predrilled holes.
  • Página 7 STEP 7 Attach Small Drawer Sides (13 & 14), with slide wheels to the rear and grooves for drawer bottom aligned, to the Small Drawer Face (9) with 3.5x30mm Phillips Pan Head Screws (C) through the predrilled holes. Slide the Drawer Bottom (10) into the grooves in the drawer sides.
  • Página 8 TIPPING RESTRAINT Your unit comes with a tipping restraint to help prevent the unit from falling forward should a child attempt to climb on it. Please follow the instructions provided below. TIPPING RESTRAINT Attach tipping restraint to the center of the top back edge of your unit. Follow these instructions and use the hardware contained in the packet provided.
  • Página 9 Modelo # 598KFDW1 Cómoda Crescent Normas para obtener servicio: Reemplaza- Instrucciones para Armar remos las piezas que tengan defectos, falten o se dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax, correo o e-mail) para obtener piezas de repuesto.
  • Página 10 598KFDW1 Cómoda Crescent LISTA DE PIEZAS ANTES DE COMENZAR A ARMAR, verifique que ha recibido todas las piezas que se listan en la lista de piezas que se presenta a continuación. Cant. Cant. Cant. 12 Panel posterior del 1 Panel superior ......01 B Tornillo Phillips de cabeza cajón grande ......
  • Página 11 No. de modèle 598 KFDW1 Commode Crescent Politique de service : Nous remplacerons Instructions de Montage toutes les pièces défectueuses, manquantes ou endommagées pendant le montage. Veuillez con- tacter directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
  • Página 12 598KFDW1 Commode Crescent NOMENCLATURE DES PIÈCES AVANT DE COMMENCER L’ASSEMBLAGE, vérifi ez si la quantité des pièces reçues correspond à la liste ci-dessous. Qté Qté Qté 12 Extrémité de grand tiroir ..03 C Vis cruciforme à tête Dessus ........01 bombée (3,5 x 30 mm) ..
  • Página 13 Presented by Whittier Wood Products 1. Choose a finish that will meet your expectations for the product you are finishing. Are you matching existing furniture or do you want a “natural” finish? Is the piece to be functional, decorative or both? The answers Rubber gloves to these questions may affect the type of finish you choose.
  • Página 14 Gluing Hints (cont.) 3. We recommend that you use a good wood glue, such as Elmer’s Wood Glue or White Glue, Tite- bond Wood Glue or the equivalent; unless the instructions call for a special type such as a slow drying epoxy glue.
  • Página 15 Presentada por Whittier Wood Products 1. Elija un acabado que cumpla con las expectativas para el producto a ser acabado. ¿Debe hacer juego con otros muebles o se desea un acabado “natural”? ¿Ha de Guantes de caucho ser funcional, decorativo o ambas cosas? Las respuestas a estas preguntas pueden Trapos afectar el tipo de acabado que se seleccione.
  • Página 16 Ayudas Para el Pegamento: (cont.) 3. Recomendamos que utilice una buen pegamento de carpintero, como Elmer’s Wood Glue o White Glue, Titebond Wood Glue o su equivalente. Lea el rótulo del fabricante cuidadosamente y siga todas las instruc- ciones. 4. Asegúrese de que los agujeros estén libres de polvo para que el pegamento tenga una superficie limpia a la cual adherirse.
  • Página 17 Présenté par Whittier Wood Products 1. Choisissez un enduit de finition qui réponde à ce que vous attendez du meuble. Souhaitez-vous l’harmoniser à votre mobilier actuel ou voulez-vous un aspect naturel ? Le meuble est-il destiné à être fonctionnel, décoratif ou les deux ? Le type Gants en d’enduit de finition que vous choisissez dépend des réponses à...
  • Página 18 Conseils de Finition (suite) 3. Nous vous recommandons d’utiliser une bonne colle à bois, par exemple Elmer’s Wood Glue ou White Glue, Titebond Wood Glue ou équivalent, sauf si les instructions préconisent un type spécial de colle, par exemple une colle époxyde à durcissement lent. Lisez attentivement l’étiquette du fabricant et suivez toutes les instruc- tions.