Descargar Imprimir esta página

Publicidad

Enlaces rápidos

Model #
541W
Monterey 4-Drawer
Chest
Assembly Instructions
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
Unload items from this unit prior to moving.
Do not overload drawers on this unit.
Before loading or moving this unit, check all screws
and supports for tightness.
For maximum stability, attach unit to the wall using
the enclosed hardware as per instructions.
Presented by Whittier Wood Products
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
which are defective, missing or damaged
during assembly. Please contact Whittier
Wood Products customer service department
directly (by phone, fax, mail or email) for
replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter, production code, quantity
needed, reason for replacement and your full
name and address along with a telephone
number in case we need to contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
We will replace any parts
Rev. 8/05

Publicidad

loading

Resumen de contenidos para Chaparral 541W

  • Página 1 Model # 541W Monterey 4-Drawer Chest Service Policy: We will replace any parts which are defective, missing or damaged Assembly Instructions during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts.
  • Página 2 541W Monterey 4-Drawer Chest — Parts List Before beginning assembly, check that the quantities of the parts received match those on the parts list below. J — Right Drawer Side — Qty. 4 E — Top — Qty. 1 K — Drawer Bottom — Qty. 4 A —...
  • Página 3 541W Monterey 4-Drawer Chest — Parts List (cont.) U — #6 x 5/8" Undercut W — #8 x 1" Machine Screw — Qty. 16 Screw — Qty. 8 V — Knob — Qty. 8 T — Drawer Slide Set — Qty. 4 Sets X —...
  • Página 4 The bottom edge of the Base (C) needs to be flush with the bottom edge of the Left Side Assembly (A). Use two Screws (O) through the cleat to secure the Base (C) in place. Page 4 – 541W...
  • Página 5 See FIGURE 5. Attach body assembly to the Top (E) using Screws (O) through the cleats in the side panels and the front Sleeper (B). 541W – Page 5...
  • Página 6 Use Screw (P) in the pre-drilled holes to secure the Backs to the unit. Hammer Tack Glides (Q) into bottom corners of the unit. See FIGURE 6B. Page 6 – 541W...
  • Página 7 The wheels should be to the rear and the front edge should be flush against the back of the Drawer Front. Attach each slide with two Screws (U). See FIGURE 8. Repeat Steps 7 & 8 for the other three drawers using Lower Drawer Fronts (H). 541W – Page 7...
  • Página 8 Raise to level and push in. See FIGURE 10A. The drawer with the Upper Drawer Front (G) should be installed on the top location. See FIGURE 10B. 11. When you have determined the location for your unit, install the Furniture Tipping Restraint (X). Carefully follow the instructions on the package. Page 8 – 541W...
  • Página 9 Modelo # 541W Cómoda con 4 Normas para obtener servicio: Reemplaza- Cajones Monterey remos las piezas que tengan defectos, falten o se dañen durante el armado. Sírvase comunicarse con Instrucciones para Armar el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax,...
  • Página 10 541W Cómoda con 4 Cajones Monterey Lista de piezas ANTES DE ENSAMBLAR, verifique que haya recibido todas las piezas que se listan en la lista de piezas que se presenta a continuación. Parte Descripción Cantidad Parte Descripción Cantidad Parte Descripción Cantidad A Conjunto lateral izquierdo .
  • Página 11 (G) con los cuatro receptáculos de leva (S). Cerciorarse de que los receptáculos de leva miren hacia fuera desde el cajón y de que los surcos para el fondo del cajón estén parejos. 541W SP — PG 3...
  • Página 12 No. de modèle 541W Commode Monterey Politique de service : Nous remplacerons toutes à 4 Tiroirs les pièces défectueuses, manquantes ou endom- magées pendant le montage. Veuillez contacter Instructions de Montage directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
  • Página 13 541W Commode Monterey à 4 Tiroirs Nomenclature des pièces AVANT DE COMMENCER LE MONTAGE, assurez-vous que les quantités de pièces reçues correspondent à celles de la nomenclature des pièces figurant ci-dessous. ID Description Qté ID Description Qté ID Description Qté...
  • Página 14 Serrez les boîtiers de came. Faites glisser le fond du tiroir (K) dans les rainures. Fixez l’extrémité du tiroir (L) aux côtés au moyen de la vis (O), comme illustré à la FIGURE 7A. 541W FR — PG 3...