Publicidad
Idiomas disponibles
Idiomas disponibles
ADJUSTING
TINE DEPTH
Tine adjustment will vary depending on the type of soil
being cultivated and how it will be used. Generally,
adjusting the tines to break the soil 4 to 6 inches is
recommended for most gardens. Adjust the tines as
follows:
1.
Stop the engine and disconnect the spark plug wire.
2.
Loosen (do not remove) the two wing nuts on the
tine guard (Fig. 5).
3.
Slide the roller bracket assembly down for shallower
penetration, and up for deeper tine penetration.
4.
Once the tines are in the desired position, tighten the
wing nuts, making sure that the carriage bolts are
seated properly through the bracket.
5.
If the tine depth is incorrect, repeat steps 2 to 4.
6.
Reconnect the spark plug wire and continue use.
Up
Down
\,
\\
Fig. 5
Publicidad
