Publicidad
Idiomas disponibles
Idiomas disponibles
Closingthe Top Lid
For s afet'/purposes,
the toplidmust always b eclosed d uring the wash process, ff
you open the top lid while the wash c';,'cJe is in progress,you wiJJobserve the
following:
An alarm will sound.
® Thetub will not spin whib the lid is open.
® Hf t he unit is in wash mode, it wiJJstop running_
Simply dose the top lid and press the start/pause button to resume the cycJe.
Steps f@r the Wash
Pr@¢ess
1. Turnthe power ON.
2. Fill the detergent/softenerdispensen
3. Selectthe desiredwash program_
Note:
Hf y ou choose to keep the "Auto Presets" of the program, skip to
step #5. Hfyou choose to change any or dJ of the preset options,
continue to step #4. There may be some restrictions when choosing
selected options.
4. Manually Selecting Your Options
• When selecting wash cycle options, please refer to the "Program Select Wash
Cycle Options" section on page 12 for details.
• When selecting delay start, please refer to "Delay Start Button" section on
page 7 for details_
® When selecting water level, please refer to " Water Levd Selector" section on
page 7 for details.
® When selecting temperature, please refer to "TemperatureSelect Wash/Rinse"
section on pages 8 for details.
• Once you have selected the proper settings, go to step #5.
5. Load clothesinto the washtub_
6. Close the washer doors properly.
7. Press the "Start/Pause" button to begin the wash process_
Note:
If the Normal Program is selected, the machine will automatically select the
water level and wash time according to the clothes and weight of the
Jaundry_ The entire procedure is controlled automatically. The pulsator wiJJ
not rotate unless the water is filled to the selected water levek
14
Publicidad
