Publicidad
Idiomas disponibles
Idiomas disponibles
How
to Use the Adjustable
Nozzle
You should now know how to START
and STOP
your
pressure washer.The
information
in this section will tell
you how to adjust the spray pattern and to apply detergent
or other cleaning chemicals.
CAUTION
* NEVER adjust spray pattern when spraying.
* NEVER put hands in front of nozzle to adjust spray pattern.
I.
Slide nozzle forward when you wish to adjust spray to
low pressure mode (Figure I 0). Slide nozzle backward
to achieve high pressure.
Slide nozzle backward
for High Pressure
Mode
Slide nozzle forward
for low
pressure mode and
detergent application
2.
Point nozzle down towards a firm surface and press
trigger to test pattern
(Figure
I I).
3.
Twisting nozzle adjusts
spray pattern
from a narrow
pattern
to a fan pattern
(Figure
12).
Rotate
nozzle
counterclockwise
for fan
spray pattern
Rotate
nozzle clockwise
for narrow
spray pattern
4.
For most effective cleaning, keep spray nozzle from
8 to 24 inches away from cleaning surface.
S.
If you get spray nozzle too close, especially
using high
pressure
mode, you may damage surface
being cleaned.
6.
DO NOT get closer
than 6 inches when
cleaning tires.
Applying
Detergent
with
the
Adjustable
Nozzle
IHPORTANT:
Use
soaps
designed
specifically
for
pressure
washers.
Household
detergents
could damage
the pump.
CAUTION
* Starting the engine without all the hoses connected and
without the water turned ON will damage the pump.
* Damage to equipment resulting from failure to follow this
instruction will void warranty.
To apply
detergent,
follow
these
steps:
I.
Review use of adjustable
nozzles.
2.
Prepare
detergent
solution
as required
by job.
3.
Place filter end of chemical
injection
hose into
detergent
container.
CAUTION
* When
inserting
filter into a detergent
solution
bottle, route
tube so as to keep it from inadvertently
contacting
hot muffler.
Publicidad
