Publicidad
Idiomas disponibles
Idiomas disponibles
13
ONLY APPLIES WHEN
USING THE 3-PIECE FINE
PARTICLE FILTER NOT
THE HEPA-TYPE FILTER.
The 3-piece filter should be
cleaned frequently; daily
under high use conditions,
weekly if used less. For best
results, vacuum filters with
a tank vacuum at the end of
each day. Remove the foam
and felt filters and screen
from the filter housing lid.
Inspect the filters for soil.
If they are soiled, vacuum
both sides of each filter.
Place the filters in this order:
screen, felt filter, foam filter.
The foam filter has a snug fit
and will hold the felt filter
and screen in place.
NOTE: When cleaning with
HOST SJ, the filter light will
come on more frequently
and you will have to clean
the filters more o en.
How to Remove Tough Spots
& Spills with the Freestyle
Prepare the spot, for dry spots and
spills, vacuum area first, or for wet
spots and spills blot or scrape area
first. Scatter HOST Dry Extraction
Cleaner on the spot. Concentrate the
brushing in a circle over the spot.
Brush an area slightly larger than the
area with the spot. A er brushing,
vacuum up the HOST with the
Freestyle.
If carpet is very dirty or has tough
spots and spills, PREP® Tra ic Lane
Booster may be necessary. To use
PREP mix 1 part PREP in 4 parts water
in a trigger spray bottle, then mist
PREP lightly on dirty carpet/spot.
Apply HOST Dry Extraction Cleaner as
before and brush with Freestyle then
vacuum.
CAUTION: Improper use or dilution may
cause damage to surface and increased risk
of health e ects.
THE CLEANING SYSTEM that makes A DIFFERENCE
Felt Filter
hostdry.com | 800-558-9439
GROUNDING INSTRUCTIONS
This machine must be grounded. If it should
malfunction or break down, grounding provides a path
of least resistance for electric current to reduce the
risk of electric shock. This machine is equipped with
a cord having an equipment-grounding conductor
and grounding plug. The plug must be inserted into
an appropriate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances.
WARNING: Improper connection of the equipment-
grounding conductor can result in the risk of electric
shock. Check with a qualified electrician or service
person if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug provided
with the machine. If it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
This machine is for use on a nominal 120 volt circuit,
and has a grounded plug that looks like the plug
illustrated in Diagram A. A temporary adapter that
looks like the adapter illustrated in Diagram B may
be used to connect this plug to a 2-pole receptacle
as shown in Diagram C if a properly grounded outlet
is not available. The temporary adapter should be
used only until a properly grounded outlet can be
installed by a qualified electrician. The green colored
rigid ear, lug, or the like extending from the adapter
as illustrated in Diagram B, must be connected to a
permanent ground outlet box cover. Whenever the
adapter is used, it must be held in place by a metal
screw as shown in Diagram C.
NOTE: In Canada, the use of a temporary adapter is
not permitted by the Canadian Electrical Code.
The electrical cord on the Freestyle has been
designed to give the proper power to the motor
through both the gauge and length of the cord. Do
not use an extension cord. The grounding plug at
the end of the cord should NOT be removed.
9
Publicidad
