Descargar Imprimir esta página

HoMedics HP-G51DKJ Manual página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

This heating pad has a polarized plug (one blade is wider than the other) as a
safety feature. This plug will fit into a polarized outlet only one way. If the plug
does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. DO NOT attempt to defeat this safety feature.
INSTRUCTIONS FOR USE
Fig. 1
Fig. 2
1. Connect the control connector to the pad connector, push both parts together to
secure the fit (Fig. 1).
NOTE: Before plugging unit into the outlet the controller must be connected to the
heating pad.
2. Plug unit into an AC 120-volt electrical outlet (Fig. 2).
3. Place heating pad on the desired area of the body (Fig. 3).
4. Press power
button to turn on heating pad. The lowest heating setting #1 will
illuminate when turned on.
5. Press the +/- buttons to adjust the heat up or down to the desired setting (Fig. 4).
6. Push power
button until the unit has turned off and unplug the unit from the
outlet to store.
Fig. 3
Fig. 4
4
Temperature
control buttons
Power button
AUTO-OFF FEATURE:
• Your heating pad controller is equipped with an auto-off safety feature. This
feature helps to conserve energy by automatically turning off after 2 hours of
continuous use.
• The auto-off indicator light will flash to indicate the unit has turned off.
NOTE: This controller is equipped with an energy-saving feature. The LCD screen will
automatically shut off after 30 seconds, although power is still flowing to the unit.
Press any button to illuminate the LCD screen and display the heat setting again.
COLD THERAPY
This heating pad is freezer safe for cold therapy. Cold therapy relieves pain and
reduces swelling and inflammation.
1. Unplug heating pad.
2. Disconnect cord from heating pad and insert the entire heating pad into the freezer.
3. You can fold the pad in half or gently roll the heating pad to gain extra space in
your freezer.
4. Once the heating pad feels cool, remove it from the freezer and apply to the
desired area.
5. Allow the heating pad to naturally warm up to room temperature before using
for heat therapy.
NOTE: Cooling time varies by freezer.
LCD Screen
Auto-off light
5

Publicidad

loading