Publicidad
Idiomas disponibles
Idiomas disponibles
T-BALL HOLDER ASSEMBLY/ INSTALACIÓN DEL SOPORTE PARA PELOTAS EN FORMA DE T
• For Baseball Game: /
Para jugar a Béisbol:
SOCCER GOAL ASSEMBLY / PARA JUGAR A PORTERÍA
• For Soccer Play: /
Para jugar a Fútbol:
CARE AND MAINTENANCE
GB
• The owner of this product shall be responsible for maintaining the legibility of the warning labels.
• At the beginning of each play season:
Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace
as necessary.
• To check all coverings for bolts and sharp edges and replace when required.
• To replace defective parts in accordance with the manufacturer's instructions.
• Please check the unit twice monthly during the usage season for tightness, and tighten as required. It is particularly important that this
procedure be followed at the beginning of each season and monthly thereafter for evidence of deterioration. Replace as needed. If
not checked regularly, parts can be loose or missed and components can become detached and cause injuries.
• DO NOT allow children to climb or to play when the product is wet. It may be slippery when wet.
• DO NOT leave this item exposed to strong wind and inclement weather.
• Clean the slide regularly with soapy water in order to avoid a build up of static electricity.
• When the slide is exposed to direct sunlight, check the temperature on the product surface. If the slide chute is too hot, pour cold
water on the slide chute until it cools and wipe dry before giving it to children.
• At the end of each play season or when temperature falls below 32°F / 0°C, remove the product and store indoors. In extreme cold
weather, plastic materials lose resilience and may become brittle and crack upon impact.
• NEVER attach any materials that are not specifically designed for use with this product, such as (but not limited to) jump ropes,
clotheslines, pet leashes, cables and chains, these pose a potential strangulation hazard.
• Discard all packaging properly after unit has been assembled.
• Disassemble and dispose of this product in a safe place and manner so as not to present any hazard to any individual at the item
when the product is discarded.
• At the beginning of each play season:
Check metal parts for rust. If found, sand and repaint using a non-lead based paint meeting the requirements of 16 CFR 1303.
• Once a month during play season:
Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace
as necessary.
• At the end of each play season or when temperature falls below 32°F/0°C:
Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace
as necessary.
• Twice a month during play season:
Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace
as necessary.
Q
P
9
Publicidad
