Kenmore 795.7943 Serie Manual De Uso Y Cuidado página 14

REFRIGERATOR INSTALLATION
7. Using 10mm or 13 / 32 inch socket wrench, remove the
WKUHH EROWV DQG OLIW Rç WKH WRp hinge. Set parts aside.
8. Slightly lift up the refrigerator door and remove it.
Middle Hinge Bracket
Turn the freezer door upside down on a non-scratching
surface.
9. Loosen the screw to remove the door closer/stop and
hinge pin insert.
Door Closer / Stop
10. Move the hinge pin insert bracket to the other side
of the door, keeping the same orientation, and move
the hinge pin insert into the hole on the left side of the
bracket.
 5HYHUVH WKH GRRU FORVHUVWRS E\ pLSSLQJ LW RYHU 3ODFH LW
on top of the hinge pin insert bracket, and tighten both
down with the screw.
Top Hinge
Hinge Pin
Hinge Pin Insert
Hinge Pin
Insert Bracket
 3U\ Rç WKH FRYHU RQ WKH WRS OHIW VLGH RI WKH UHIULJHUDWRU
to uncover the screw holes.
Set the freezer door and top hinge parts to the side and
remove the refrigerator door.
REVERSING THE REFRIGERATOR DOOR
1. Remove the hinge hole plug and the two screws located
in the upper part of refrigerator handle with a screw-
driver.
Hinge Hole
Plug
Handle
2. Loosen the upper set screw with a
remove the handle. The refrigerator handle is going to
be the freezer handle when reversing doors.
NOTE: Grasp the handle tightly so that it does not fall
when the screws are removed.
Screw
Wrench
Handle
14
Cover
(on top of
refrigerator)
Screws
3 / 32 "
hex wrench and