Publicidad
10 Commercial Manuals
Instruction Delta Temperature Control DTB 4848 – Adjust
10.1
Temperature
1. Turn on power switch of the equipment.
2. The Temperature Default is in °C.
3. To change the temperature Set Value "SV", press either UP
or DOWN arrow (Figure 10-1, Item 5).
4. The display LED's for the Set Value "SV" will go from solid to
flashing rapidly.
5. Use the UP or DOWN arrows (Figure 10-1, Item 5) to change
the number to the desired value (Holding the buttons down
continuously will result in rapid change of the value).
6. Once the desired value is established, press the set key
(Figure 10-1, Item 3) to save the changes and the numbers
will return to normal NON-FLASHING numbers.
7. The unit is now ready to start.
man-STC-42112-V17-3 Spanish
Commercial Manuals 10
Resistómetro de Tracción en Húmedo
49
Publicidad
