Publicidad
IDE/SATA Function Setup
Click <Enter> key to enter its submenu:
IDE 1 Controller
IDE DMA Transfer Access
OnChip SATA Controller
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
IDE 1 Controller
This item allows you to enable or disable the IDE1 controller.
IDE DMA Transfer Access
This item selects the DMA mode for devices connected through IDE channels.
OnChip SATA Controller
This item enables or disables the onchip SATA controller.
RAID Configuration
Click <Enter> key to enter its submenu:
OnChip SATA Mode
x - SATA1 RAID
x - SATA2 RAID
x - SATA3 RAID
x - SATA4 RAID
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
AN-M2/AN-M2HD
Phoenix – AwardBIOS CMOS Setup Utility
IDE/SATA Function Setup
Enabled
Enabled
Enabled
F6: Fail-Safe Defaults
Phoenix – AwardBIOS CMOS Setup Utility
RAID Configuration
IDE
Disabled
Disabled
Disabled
Disabled
F6: Fail-Safe Defaults
Item Help
F7: Optimized Defaults
Item Help
F7: Optimized Defaults
2-11
Publicidad
