OZ Lifting Products OZ500EC Manual Del Operador página 5

Introduction
Thank you for purchasing your OZ Lifting Products LLC® OZ500EC. This manual contains general
instructions dealing with the normal installation, operation, and maintenance of the product described
herein only. This manual is not intended to provide instruction on the usage of any other component.
It is the user's responsibility to ensure that all components are suitable for use and are used correctly.
The information provided should not be expected to prepare the user for all possible circumstances.
This product should not be installed, operated, or maintained by any person who has not read all
the contents of these instructions. Failure to read and comply with these instructions, warnings, or
limitations noted might result in bodily injury, death, or property damage. Contact the distributor for
further explanation if information is not fully understood.
It is the responsibility of the owner/user to install, test, maintain, and operate these products in
accordance with OSHA regulations, other federal, state, and local regulations.
Specifications
Model OZ500EC
Voltage 115 / 1 /60
Capacity 500 lbs.
Speed 12.5 FPM
Motor .25 HP
Motor KW 180W/4A
Chain 4mm X6M
Duty Cycle 15 min.
Pendant 15'
Power cord 15'
Lift 20'
*Custom lifts available
Net Weight 18 lbs.
Measurements
A 5"
B 15"
C 9.5"
D 11"
E 0.6"
F
2.5"
G 0.75"
EN pg.5