Publicidad
Idiomas disponibles
Idiomas disponibles
1.1.3 Key switch
Key switch
Connect and interrupt control current.
• When the key rotates to gear "OFF", the
control current of the truck will be interrupted;
• When the key rotates to gear "ON", the control
current of the truck will be connected.
i
NOTE
Pulling out the key switch of a forklift
before leaving can prevent the forklift from
starting accidentally.
1.1.4 Display instrument
When the truck is started, the four light
indicator will light up. When the only
residual light indicator (4) is lit, it means
that the truck capacity is low and it should
be charged immediately.
WARNING
When the only residual light indicator (4) is
flashing, the truck will be power off.
i
NOTE
Only in the static state of F4 can the
battery capacity be accurately observed
via four indicator lights .
i
NOTE
It is normal that the light indicator will still
be on when the key switch is turned off and
the supply plug is not pulled out.
i
NOTE
If the car is out of power, you need to wait
for 5-10 minutes until the battery power
is restored before moving the car and
charging it immediately.
REV. 09/2022
4
B
6
Fig0000-00098OM
3 2
Fig1154-00002OM
1
Publicidad
