Publicidad
Idiomas disponibles
Idiomas disponibles
Using the smart connect feature
The cooktop has built in a Wi-Fi module that you can use to sync the cooktop with
the SmartThings app. On the smartphone app, you can:
•
monitor the operating status and the power level settings of the cooktop
elements.
•
check and change the timer settings.
Functions that can be operated from the SmartThings app may not work smoothly
if communication conditions are poor or the product is installed in a place with a
weak Wi-Fi signal.
How to connect the cooktop
Before you can use the remote features of your Samsung cooktop, you must pair it
to the SmartThings app.
1. Download and open the SmartThings app on your smart device.
2. Follow the app's instructions, and then touch and hold the Smart Connect key
for 3 seconds.
3. While the connection is being made, the LED indicator above the Smart
Connect key blinks. Once the process is complete, the indicator glows without
blinking. Now the cooktop is connected successfully.
4. If the Smart Connect LED indicator does not turn on, follow the instruction in
the app to reconnect.
NOTE
For further instructions, refer to the web manual at www.samsung.com
Wi-Fi On/Off
•
Touch the Smart Connect key to turn on or turn off the Wi-Fi connection.
NZ30K7570R_DG68-00821B-06_EN+MES+CFR.indb 25
Using the hood control feature
This product features a Bluetooth device that you can use to connect the cooktop
to Samsung hood control models. Through the Bluetooth connection, you can use
the hood control function on the SmartThings app.
To find out more about Samsung hood control-enabled models, visit www.
samsung.com.
To connect to a hood control model
1. Download and run the SmartThings app on your smartphone. Then, complete
the Smart Connect procedure to connect to the cooktop.
2. Follow the Bluetooth instructions of the hood control model and activate the
Bluetooth connection.
3. Touch and hold the Smart Connect and Child lock buttons simultaneously to
make the Bluetooth connection. When the Bluetooth connection is sucessfully
established,
appears on the display.
4. Follow the instructions in the user manual of the hood control model and the
App guide to use the hood control.
NOTE
•
If the Smart Connect connection is not successful, you cannot use the
SmartThings app to monitor and control the hood.
•
Without a Smart Connect connection to the cooktop, you can use a Bluetooth
connection to pair the cooktop with the hood and sync them. To do this, follow
steps 2 and 3 above.
English 25
2018-08-29
2:24:00
Publicidad
