Maintenance
Maintenance
Care and cleaning of the glass cooktop
Normal daily use cleaning
Use only a ceramic cooktop cleaner. Other creams may not be as effective.
By following these steps, you can maintain and protect the surface of your glass
cooktop.
1. Before using the cooktop for the first time, clean it with a ceramic cooktop
cleaner.
•
This helps protect the top and makes cleanup easier.
•
Daily use of a ceramic cooktop cleaner will help keep the cooktop looking
new.
2. Shake the cleaning cream well. Apply a few drops of cleaner directly to the
cooktop.
3. Use a paper towel or a cleaning pad for ceramic cooktops to clean the entire
cooktop surface.
4. Use a dry cloth or paper towel to remove all cleaning residue. No need to
rinse.
WARNING
DAMAGE to your glass surface may occur if you use scrub pads other than those
recommended.
26 English
NZ30K7570R_DG68-00821B-06_EN+MES+CFR.indb 26
Removing burned-on residue
1. Allow the cooktop to cool.
2. Spread a few drops of ceramic cooktop
3. Using a cleaning pad for ceramic
4. If any residue remains, repeat the steps
5. For additional protection, after all
Removing heavy, burned-on residue
1. Allow the cooktop to cool.
2. Use a single-edge razor-blade scraper
3. After scraping with the razor scraper,
4. For additional protection, after all
cleaner on the entire burned residue
area.
cooktops, rub the residue area, applying
pressure as needed.
listed above as needed.
residue has been removed, polish the
entire surface by applying ceramic
cooktop cleaner with a paper towel.
at approximately a 45° angle against
the glass surface and scrape the soil. It
will be necessary to apply pressure to
remove the residue.
spread a few drops of ceramic cooktop
cleaner on the entire burned residue
area. Use a cleaning pad to remove any
remaining residue. (Do not scrape the
seal around the edges of the cooktop.)
residue has been removed, polish the
entire surface by applying ceramic
cooktop cleaner with a paper towel.
2018-08-29
2:24:00