afx light BEAM-200LED-FC Manual De Uso página 6

UNPACKING INSTRUCTIONS
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure
that all parts are present and have been received in good condition. Notify the freight company
immediately and retain packing material for inspection if any parts appear to be damaged from
shipping or the carton itself shows signs of mishandling. Keep the carton and all packing materi-
als. In the event that a fixture must be returned to the factory, it is important that the fixture be
returned in the original factory box and packing.
CONTENTS OF THE CARTON
• 1 x LED light effect
• 2x omega clamps
• 1x Powercon cable
• 1x DMX lead
• 1x User Manual
EXPLANATION OF SYMBOLS ON THE SILKSCREEN
The triangle containing a light-
ning symbol is used to indicate
whenever your health is at risk (due to
electrocution, for example).
An exclamation mark in a triangle indicates particular risks in handling or operating the ap-
pliance.
The unit complies with UK standards
For indoor use only
Minimum distance between the appliance and other objects
0.5m
Don't stare into the light beam
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local
authorities or your dealer about the way to proceed.
Please read this manual carefully before operating this product.
SAFETY RECOMMENDATIONS
• Please read these instructions carefully, they include important information about the installa-
tion, usage and maintenance of this product.
• Please keep this User Guide for future reference. If you sell the unit to another user, be sure that
he also receives this instruction booklet.
• Always make sure that you are connecting to the proper voltage, and that the line voltage you
are connecting to is not higher than that stated on the bottom of the fixture.
• The appliance is part of class I and must exclusively connected to an earthed mains outlet.
• This product is intended for indoor use only!
• To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no
flammable materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from
adjacent surfaces. Be sure that no ventilation slots are blocked.
• The minimum distance luminaire from that part of the luminaire or lamp to the lighted object is
0.5m.
0.5m
• The max. ambient temperature (Ta) is 40°C. Don't operate the fixture at higher temperatures.
• The surface temperature of the unit may reach up to 85°C. DO NOT TOUCH the housing bare-
hand during its operation. Turn off the power and allow about 15 minutes for the unit to cool
down before replacing or servicing.
• DO NOT OPEN the unit within 5 minutes after switching off.
EN 6
USER MANUAL
DO NOT OPEN THE HOUSING
CAUTION
SHOCK HAZARD
© COPYRIGHT LOTRONIC 2023