Descargar Imprimir esta página

afx light BEAM-200LED-FC Manual De Uso página 9

Cabeza movil de led de 200w en un flightcase

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Reset Default
Ethernet Function
SET
Reverse Pan
Reverse Tilt
Select Pan
Select Tilt
Mic sensitivity
OFF signal mode
Scan quick mode
Totem mode
Reset
Manu
Channel
ADV (Ad-
Calibration UID
vanced)
code
(Access code
0888)
MAINTENANCE AND CLEANING
DANGER! DISCONNECT FROM THE MAINS BEFORE STARTING ANY MAINTENANCE WORK
It is essential that the fixture is kept clean and that no dust, dirt or smoke fluid residues are allowed
to build up on or in the fixture. Failure to do so will significantly reduce the luminaire's light output.
Regular cleaning will not only ensure maximum light output but will also give the fixture a long and
reliable life. A soft, lint-free cloth moistened with any good glass cleaning fluid is recommended.
Never use alcohol or solvents!
The front lens should be cleaned weekly as smoke fluid tends to build up and reduce light output
very quickly. The cooling fans should be cleaned monthly.
The inside of the fixture should be cleaned at least once a year with a vacuum cleaner or blower. Use
a soft brush and vacuum cleaner to remove dust and dirt from the fans and cooling vents.
IMPORTANT! Check the air filters regularly and clean them before they become clogged!
Clean two air filters located in the fixture covers and two in the fixture base. Use a vacuum cleaner,
compressed air or you can wash them and put them back dry.
After replacing the air filters, reset the elapsed time counter in the Information menu (Information
-> Air filters -> Elapsed time).
SPECIFICATIONS
Power supply .................................................................................................................... 100-240V~50/60Hz
Consumption ............................................................................................................................................. 300W
Colour temperature ................................................................................................................................ 7500°K
Yes/No
ArtNet to DMX
(On/Off)
Device IP addr:
192.168.001.201
Host IP Addr:
192.168.001.001
Universe:
000
Share signal:
(On/Off)
(on/off)
(on/off)
630/540/360
270/180/90
0-99%
(On/Off)
(On/Off)
OFF/CEN./R/L
Total reset
Scan reset
Colour reset
Gobo reset
Other Resets
PAN=XXX...
PAN=XXX...
WWW.AFX-LIGHT.COM
Reset default
Connect ArtNet to DMX
Setting Device IP address
Setting Host IP address
Setting the Universe Send ArtNet
signal to DMX
Reverse Pan
Reverse Tilt
Select Pan
Select Tilt
Mic sensitivity
Off at original status and ON
at reset status
Fast scan
Totem mode
Reset All
Reset Scan
Reset Colour
Reset gobo
Reset the others
Manual channel control
Calibration
9
EN

Publicidad

loading

Este manual también es adecuado para:

16-2016