Publicidad
BASIC FUNCTION OPERATION
OPERACIÓN DE FUNCIONES BÁSICAS
1. Indicator Light & Printer Status
The printer has 3 Led Indicators(Power / Error and Paper Out
). The power indicator will lights on once power is plugged in.
And Error led will lights on when any error occurred (Paper Out /
Temperature is too high/misposition of the carriage unit on the
print head). We can press the "FEED "button to test the paper feed
function when the power indicator looks good.
2. Printer Operation
●Switch on: Ensure the adapter is correctly connected to the
printer, press the switch to the "1" position, the printer will turn on .
●Switch off: Press the switch to the "O" position.
●Paper feed: Press "FEED" button when the printer is power on,
paper will keep running & stop to run when release this button.
●Self -Test Page: Turn off the printer then press and hold the
"FEED" button, press the "POWER" button at the same time till the
"PAPER OUT" indicator on, release the button then we can read
the current setting from the test page .
●Hexadecimal printing: Turn off the printer, press "FEED " button &
do not release it, press "POWER "button at the same time until the
"PAPER OUT "indicator on , release the
"FEED"button about 3 seconds after the "PAPER OUT" indicator
off , then the printer will run into hexadecimal printing mode. The
way to quit hexadecimal printing model is just restart the printer.
1. Luz indicadora y estado de la impresora
La impresora tiene 3 indicadores LED (encendido/error y falta
de papel). El indicador de encendido se encenderá una vez que
se conecte la alimentación. Y el LED de error se encenderá
cuando ocurra algún error (falta de papel/temperatura demasiado
alta/ubicación incorrecta de la unidad del carro en el cabezal
de impresión). Podemos presionar el botón "FEED" para probar
la función de alimentación de papel cuando el indicador de
encendido se vea bien.
12
Publicidad
