Publicidad
Idiomas disponibles
Idiomas disponibles
USE, MAINTENANCE AND PRECAUTIONS OF
SCISSORS
1. Do not prune branches that exceed the working range of the shears; do not cut hard objects such as metal
and stone; do not hold any tool with a vise. If the blade is worn or damaged, replace it in time.
2. Keep the device clean. Use a clean cloth to clean the electric pruning shears, battery pack and charger (do
not use corrosive or solvent-based cleaners); use a soft brush or a dry cloth to clean dust on the shears bit.
3. Do not immerse the electric pruning shears, battery pack and charger in any liquid such as water.
4. Please use the device according to the instructions for use. Do not use the electric pruning shears, battery
pack and charger if they are damaged.
5. If the switch fails to turn on or off the electric pruning shears properly, do not use it, given it is dangerous
when the switch fails to work. It must be repaired.
6. Ensure that the switch is turned off when making any adjustments, replacing accessories, or storing the
electric pruning shears. This protective measure will mitigate accidental starting of the electric pruning
shears.
7. Keep the unused shears out of the reach of children when the blade is closed. Do not let those who are not
familiar with the shears or don't understand the instructions operate it. It is dangerous for untrained users
to use it.
8. When using the shears and their accessories, please follow the instructions for use and the use methods
and take into account the working environment and the tasks to be done. Using them in any operation that
does not meet the requirements may result in a hazard.
9. After use, remove dirt on the moving blade and the fixed blade, coat the contact part with lubricating oil or
engine oil to make the blade under normal maintenance state, reduce the resistance for use next time and
extend the service life of the blade.
SAFETY PRECAUTIONS
Keep the cutting edge closed when the shears stop working.
WARNING!
instructions below may result in electric shock, fire or other serious injury!
SAFETY INSTRUCTIONS FOR WORK SITES
1. Keeping the workplace clean and bright, for chaotic and dark workplaces may cause accidents.
2. Do not operate the electric pruning shears in explosive, flammable and humid environments.
3. Operate the electric pruning shears only after children and onlookers leave the operating site to avoid
accidental injury during operation.
Please read all instructions carefully and failure to follow all of the
EN
49
INSTRUCTIONS
Publicidad
