Publicidad
Idiomas disponibles
Idiomas disponibles
ELECTRICAL SAFETY INSTRUCTIONS
1. The battery socket of the shears must match the battery connector. Do not modify the socket and plug in
any way.
EN
2. Do not expose the shears to rain or moisture. Water or other liquids entering it may increase the risk of
electric shock and damage to the device.
3. Do not misuse wires; do not use the power cord to lift, pull the shears or pull out its plug; keep the shears
away from heat, oil, sharp edges or moving parts; do not use the charger when the power cord or plug is
damaged. Damaged and entangled wires can increase the risk of electric shock.
PERSONAL SAFETY INSTRUCTIONS
1. Be alert, pay attention to the operation and keep awake when operating the shears. Do not operate them
under fatigue, medication and alcohol reaction. Distraction during operation may cause serious personal
injury.
2. Use safety guards and always wear goggles, etc. Under appropriate conditions, dust masks, non-slip safety
shoes, helmets, hearing protection, etc. can reduce personal injury.
3. Remove all adjustment keys and wrenches before turning on the shears. Any wrench or key left on the
rotating parts of the shears can cause personal injury.
4. When operating, do not stretch your hands too long, keep your hands away from the work area, never extend
your hands under the material for any reason, ensure that any material or surface under the operating area
is not damaged, and always pay attention to the balance between the feet and the body to better control
the shears in case of any accident.
5. Dress properly, do not wear loose clothes or ornaments and keep your hair, clothes and sleeves away from
moving parts, for loose clothes, ornaments or long hair may get caught in moving parts.
EXCEPTIONS AND TREATING METHODS
1. When non-cutting material is put into the notch accidentally, immediately release the trigger and the
moving blade will automatically return to the open state.
2. When the pruning branch is too hard, the trigger should be released in time and then the moving blade will
automatically return to the open state.
3. If the battery can't be charged properly, first check whether the battery charger is the one attached to the
product. Then, ensure the charging voltage must be the same with that on the nameplate.
4. If any electrical or mechanical fault occurs, please turn off the switch immediately.
5. Failure to operate in compliance with the instructions may lead to liquid eruption from the battery. Please
do not touch the liquid. In case of accidental contact, please rinse it immediately with water. If the liquid
splashes into the eye, after rinsing with water, please go to the hospital, for the liquid ejected from the
battery may cause irritation or burns.
AFTER-SALES SERVICES
In case of any problem in use, please contact us in time (see the last page for the contact details) and our
professional staff will address them for you. Replacement any damaged part with the exactly same one by our
qualified maintenance staff can ensure the safety performance of the electric pruning shears.
The company reserves the right to make technical improvements to the product described herein. Please
understand if there is any change. If there are discrepancies between the graphic images and the texts, and
the real objects herein, the latter shall apply.
50
INSTRUCTIONS
Publicidad
