Celexon Economy eAdjust-71121 Manual De Instrucciones página 18

STEP 6: MOUNTING THE PROTECTIVE GUARDS AND POWER
SUPPLY UNIT
Fit the guards (8) to the support strut (4) (as shown in the drawing). Ensure
that the holes in the guards are aligned with the holes in the support strut. Use
the screws (E) and tighten them with the Allen key (D). Insert the power supply
unit (7) into the holder (11) (as shown in the drawing).
Insert
STEP 7: WIRING
Use the cable ties (10) to attach the cables securely and without interference
to the underside of the tabletop. Make sure that the cables are not under ten-
sion or kinked.
Connection cable (13) Control panel (12)
Motor cable
Pull it off Fix
Insert cable
7