Publicidad
Idiomas disponibles
Idiomas disponibles
Setting advanced preferences
1 Touch MENU. The thermostat displays a
list of options.
Preferences
2 Select
thermostat displays the first screen of
options that you can change.
3 On each screen, make changes as
needed, then touch
options. Repeat this step until you have
made all changes.
4 When you have made all changes, press
Done
to save and exit.
Screen Title
Scheduling Options
Temperature Indication
Scale
Heating and Cooling
System Changeover
Number of Schedule
Periods
Pre-occupancy Purge
Duration *
Type of Override *
Override Duration *
Early Recovery for
Heating *
Early Recovery for Cooling *
Temperature Limits
Keypad Lockout
Clock Format
Daylight Saving Time
Indoor Display Offsets
*Available when thermostat is installed in Business mode.
Advanced
Preferences. The
>
Next
to display new
Settings and Options
Select Non-programmable or Programmable. Programmable uses
default or customized programming to automatically raise and
lower temperature settings for different times of day.
Select Fahrenheit or Celsius.
Select Manual or Automatic.
Select 2 Periods Per Day or 4 Periods Per Day.
Select how long the fan will run before each occupied period: Off, 1,
2, or 3 hours.
Select Standard to maintain the programmed periods or Initiate
Occupancy to use energy-saving settings until a user presses Start
Occupancy.
Select how long to maintain temperature during an override: 1-10
hours or No Limit.
Select No to begin recovery on schedule or Yes to ramp up
temperature early.
Select No to begin recovery on schedule or Yes to ramp down
temperature early.
Select the Minimum Cool and Maximum Heat Limit.
Select Unlocked/Partially Locked/Locked.
Select 12 Hour or 24 Hour.
Select Off or On. If set to On, the system will automatically change
time/date to account for daylight saving.
Select the number of degrees to offset indoor temperature or
percentage to offset indoor humidity.
9
Preferences
Advanced Preferences
69-2815EFS—07
MENU
Next
Publicidad
