cecotec CONGA ROCKSTAR 1700 ADVANCE ERGOWET Manual De Instrucciones página 50

ENGLISH
Box contents
Conga Rockstar 1700 Advance ErgoWet
-
2-in-1 narrow accessory for corners and furniture
-
Jaliscazo brush
-
Flexible vacuuming tube
-
Charger
-
Water tank
-
Instruction manual
-
3. PRODUCT ASSEMBLY
Vacuuming tube and brush head assembly
- To install the vacuuming brush head into the vacuuming tube, align both of them making
sure the tab on the brush head matches the guides on the tube, and introduce one into
the other until they are firmly fixed.
- To disassemble them, press the vacuuming brush head release button and pull from the
vacuuming tube while while firmly holding the vacuuming brush head.
Warning
When assembling these two parts, make sure the handle and the brush head are facing the
same direction.
Vacuuming tube, vacuuming brush head and main body assembly
To complete the installation of the upright vacuum cleaner, hold the vacuuming tube in an
upright position and insert it into the main body.
Battery assembly
Fig. 3
Introduce the battery in the slot located in the main body following the guides. Once it is
-
introduced, it will click into place. Once inserted, check that it is secured in position.
To disassemble the battery, press the release button and remove the battery.
-
Warning
Remove the battery and store it in a safe, dry place if the device is not going to be used in a
long period of time.
50