cecotec CONGA ROCKSTAR 1700 ADVANCE ERGOWET Manual De Instrucciones página 55

8. ERROR CODES
Code Problem
E1 The device turns off and does not
charge.
E2 The device does not charge.
E2 The device does not charge.
The device turns off.
E3 The device turns off and displays E3.
E5 The device turns off and displays E5.
E6 The device turns off and displays E6,.
E9 The device turns off and displays E9.
E7 The device stops working or does not
turn on and shows E7.
E8 The device turns off and displays E8.
High- The device stops or does not turn on.
efficiency Fig. 15
filter
indicator
blinks
The filter set It works normally. Fig. 14
logo flashes.
The brush The long brush and motor stop
icon flashes working. Fig. 16
9. TECHNICAL SPECIFICATIONS
Product reference: 05771
Product: Rockstar 1700 Advance ErgoWet
Voltage and frequency: 100-240 V ~ 50/60 Hz
Cause
Short circuit
The charger's voltage is below
36.3 V
The charger's voltage is below 32.1
V
Low battery
The motor short-circuits when the
battery is low
Main motor overload (second level)
Main motor overload
Temperature too high or low
Battery failure (first level)
NTC error (thermistor short circuit)
High-efficiency filter not installed
The dust tank or the inlet filter is
blocked
Blocked long brush
Long brush full of hair
CONGA ROCKSTAR 1700 ADVANCE ERGOWET
ENGLISH
55