cecotec HYDROSTEAM 2030 ACTIVE Manual De Instrucciones página 29

ENGLISH
Press the ON button.
The pressure indicator light will illuminate.
The appliance is ready to emit steam when this indicator light changes from orange to green.
Remove the steam safety lock and press the steam On/Off button positioned on the pistol
handle to generate steam.
After use, press the steam button for a few seconds to remove any residual condensation
water in the main hose.
Using the accessories:
The floor head is suitable for large surface areas (floors).
Use it with the mop cloth.
The big nozzle can be used with or without the extension tubes. The concentrated steam jet
increases the cleaning power to remove any encrusted dirt.
The round nylon brush connects to the big nozzle. It is suitable for cleaning small,
very soiled surfaces and bathrooms.
The ironing brush is fitted with the cloth, with or without extension tubes, and can be used to
remove dust from textile surfaces (sofas and cushions, etc.)
Note: On cold windows, pre-heat the surface initially by spraying the steam thirty
centimetres
away from the glass.
Filling the water tank during use
Fill the water tank when the steam flow rate decreases.
Always wait for the appliance to stop generating steam and ensure that the device is no
longer
pressurised before releasing the safety button (a special protective device prevents the
safety
button from being released if there is still pressure in the device).
Filling methods: Press the steam generator button to spray the steam until the device is
empty.
Release the control and open the safety button. Steam may be released on opening.
Fill the water tank.
Cleaning
Before cleaning a delicate surface (carpet, fabric, etc.), test the appliance on a hidden surface.
Wait for the steam to take effect and check that there is no colour change or deformity.
Switching off the device
Place the On/Off button in the Off position.
Unplug from the electric socket, leave the appliance to cool and put away.
HYDROSTEAM 2030 ACTIVE 29