cecotec TV LED A3 ALH30032 Serie Manual De Instrucciones página 17

- Connect the plug to an easily accessible socket.
- The mains plug is the only way to completely disconnect the
device from the mains. To make sure that the device is no
longer powered, you must unplug this plug from the socket.
- Be sure to unplug the power plug from the outlet during a
lightning storm or when unused for long periods of time.
- Power socket and power cable
- Make sure that the plug and power cable cannot be crushed
or jammed, especially at plugs, sockets and the point of
connection to the product.
- Be sure to position the power cable so that it cannot be
tripped over or stepped on.
- When unplugging the TV, always pull the power plug. Do not
pull the cord.
- Do not touch the product or the power cable with wet hands.
- Never knot the cord or tie it with other cords.
- If the power cable is damaged, it can be replaced by your
dealer, your after-sales service or a similarly qualified
person in order to avoid any risk.
- Do not immerse the appliance in water or other liquids.
- This symbol means: Class II equipment. This equipment
is a class II or double insulated electrical appliance. It
has been designed in such a way that it does not require a
safety earthed connection.
Installation
- Install the product on a flat, stable surface of sufficient size
to accommodate it.
- Do not install the TV set on top of another electrical appliance.
- This product should be used in a temperate climate and
indoors only.
TV LED A3 SERIES ALH30032 / ALH30032S
17