LD Systems MAILA COL Manual De Usuario página 15

The function of the equalizer bands 1 and 10 can optionally be set as fully parametric or as low-shelf
(band 1, LS) or hi-shelf (band 10, HS).
EQ
NR
FREQ
1
30 – 20000 0.1 – 10.0 / LS -20 – +10
2
30 – 20000 0.1 – 10.0
3
30 – 20000 0.1 – 10.0
4
30 – 20000 0.1 – 10.0
5
30 – 20000 0.1 – 10.0
6
30 – 20000 0.1 – 10.0
7
30 – 20000 0.1 – 10.0
8
30 – 20000 0.1 – 10.0
9
30 – 20000 0.1 – 10.0
10 30 – 20000 0.1 – 10.0 / HS -20 – +10
To set the frequency in hertz under FREQ, the Q factor or the functioning of bands 1 and 10 under Q
and the gain in dB under GAIN, select the corresponding column in the desired equaliser band (NR
1 - 10), confirm, set the value as desired and confirm again. The selected value is displayed with a white
background.
The EQ bands can be deactivated individually by selecting and confirming the band number.
Instead of a tick symbol, an X is now displayed and the values in the corresponding band appear greyed
out. Select and confirm again to activate the band.
The entire equaliser can be deactivated by selecting the EQ line, confirming, then selecting OFF and
confirming again. All values in the equaliser are now greyed out. To activate the equaliser, select ON
and confirm. To exit the menu level, select the arrow symbol and confirm the selection.
ON / OFF
Q GAIN
-20 – +10
-20 – +10
-20 – +10
-20 – +10
-20 – +10
-20 – +10
-20 – +10
-20 – +10
15