Publicidad
Idiomas disponibles
Idiomas disponibles
3. Folding and unfolding the carrier
After taking out the pet carrier, press
the bottom plate with one hand, then
pull on the iron support at a 45° angle
with the other hand, following the
direction of the arrow, until the iron
support on both sides are stuck into
the limit column. Close the zipper of
the inner baffle, then zip up one end
of the cover. You can fold the pet
carrier by pulling up the iron support
at an 45° angle.
4. Installing the handle bar of the pet
carrier Fix the upper seat on both
sides of the pet carrier into the lower
seat, following the arrow direction to
clamp in place.
5.Assemble and remove the pet
carrier
Clamp the bottom two ends of the pet
carrier into the bottom round tube of
the frame. When you hear a 'click', it
clamps into place. To remove the pet
carrier, open the lock by hand, which
is at the bottom front of the carrier,
then lift to remove
6.Install the bag
Take out the cat bag and expand it.
Pull the zipper and place the cat bag
on the cover of the pet carrier. The
front end of the cat bag is fixed on the
button, which is on the inside of the
handle – the back end is fixed on the
bottom of the horizontal tube of the
frame.
7.Fold the frame
After removing the cat bag and pet
carrier, push the unlock button to the
left side, then press the folding
button - the frame will automatically
close and stand on its own.
8.Assemble and remove the rear
wheels Insert rear wheels into rear
legs as shown in the images, then
press the release button on the rear
legs to remove the wheels
9.Brake: Press down the middle one-
link brake.
Motion: Hook the middle one-link
brake.
4
Publicidad
