Hitachi RAR-5E3 Manual página 10

FAN OPERATION
User can use the device simply as an air circulator.
AIR PURIFYING OPERATION
Negative ions are generated by the plasma electrode in the indoor unit.
Dust, mold and odour particles are captured by negative ions and are caught by the stainless pre-À lter.
AUTO SWING OPERATION
NOTE
O
During cooling and dehumidifying operation, do not keep the deÁ ectors swinging or in the lower position
(in the case of vertical auto swing) for a long time. It may cause dew condensation on the deÁ ectors.
Press the MODE selector so that the display indicates
1
(FAN).
Set the desired FAN SPEED with the
display indicates the setting).
2
(HIGH)
START
Press the
a beep. Press the button again to stop operation.
STOP
Q To start AIR PURIFYING operation
O
Press the
displayed on the LCD.
Q To cancel AIR PURIFYING operation
O
Press the (START/STOP) button. Or
O
Press (AIR PURIFYING) button again.
" " is displayed on the LCD.
VERTICAL SWING
Q To start Vertical Auto Swing
O
Press (AUTO SWING (VERTICAL)) button. The deÁ ector(s) will start
to swing up and down.
is displayed on the LCD.
Q To cancel Vertical Auto Swing
O Press (AUTO SWING (VERTICAL)) button again. The deÁ ector(s)
will stop in the current position.
disappeared from the LCD.
(MED)
(START/STOP) button. Fan operation starts with
(AIR PURIFYING) button during operation "
– 10 –
(FAN SPEED) button (the
(LOW) (SILENT)
" is