HAEGER Ultra Warm GH-42B.005A Instrucciones De Uso página 7

Now that you have identified all the parts, follow the below instructions step by step:
1. Lay the heater upside down on the front as shown. Put on a towel or soft mat/cloth
to protect from damage. Fold the (a) left side panel and (b) right side panel opening
very close to 90-degree angle. Use 6pcs screw (ST4*8) to fix the left and right-side
panel with (e) front panel. (See Figure 2)
2. Fix two wheels to the bottom of front panel directly and fix two wheels with the (c)
bottom plate by 2 provided nuts (M8). Use 4pcs screw (M5*8) to fix the bottom plate
with left and right-side panel. (See Figure 3)
Note: when positioning the bottom plate, make sure that the recesses on the plate
are facing upwards and the holes matches the holes on the left, right and front
panels.
(Figure 3)
5
(Figure 2)