Publicidad
Idiomas disponibles
Idiomas disponibles
E
Soldering unions
When carrying out soldering work, it is
essential to remove a JRGUMAT LF
thermostatic mixing valve from the unions
as the thermostat and the seals would
otherwise be damaged.
Hot water temperature
To ensure that your JRGUMAT LF
thermostatic mixing valves operate
correctly, the warm water temperature
must be at least 5 K above the desired
blended water temperature. Identical
hydraulic conditions are essential at the
hot and cold water feeds. This is ensured
by installing the mixing valves in the water
heater circuit as shown in our installation
drawings.
Repairs
No attempts should be made to repair
JRGUMAT LF thermostatic mixing valves.
5
Publicidad
