Publicidad
Idiomas disponibles
Idiomas disponibles
11. Install the cables from the direction shown in the
terminals and tighten the terminal screws to 2.5 ft/
lbs (3.5 Nm).
1
L1
2
L2
3
GROUND
NOTE: Components may have been removed for image clarity.
13. Re-attach the front cover with its two screws and
tighten them to 0.7 ft/lbs (1 Nm). The hardwire
installation is now finished.
15. NOTE FOR INSTALLATION ELECTRICIAN:
Make sure the correct operating amperage has
been set via the end users GM MyBrand / Ultium
app after set-up and pairing to the Ultium PowerUP
Charge Station (default operating amperage 6
amp).
Date
ALL INFORMATION WITHIN ABOVE
BORDER TO BE PRINTED EXACTLY
29NOV22
AS SHOWN ON 8.5 x 11 WHITE 16
13DEC22
POUND NON-BOND RECYCLABLE
PAPER. PRINT ON BOTH SIDES,
EXCLUDING TEMPLATES. TO BE
22MAR23
UNITED IN ACCORDANCE WITH
GMCCA SPECIFICATIONS.
1 2
3
Revision
Third Re l
Fourth Re l
Fifth Re l
12. Re-attach the service lid with its two screws and
tighten them to 0.7 ft/lbs (1 Nm).
14. To continue set-up of the Ultium PowerUP Charge
Station, refer to '5. OPERATING INSTRUCTIONS'
to do the following:
- Switching the charge station circuit breaker on/off
- Pairing to Bluetooth
- Downloading the GM MyBrand / Ultium app
- Setting-up a GM user account
- Charging an EV
84922762
PART No.
R 22MAR23
Auth
DR
Title
SAR
AH
SAR
MB
PART No.
SAR
MB
®
SHEET
Ultium PowerUP Charge Station
User Manual
SHEET
EN
11
Publicidad
