Publicidad
Operation
5.10
SPOKES OFF AUTOMATIC
Mode "BALANCE NO SPOKES"
1
The Spokes Off Automatic Mode has the same features
5.9),
as the Automatic function already described (
except that it excludes automatic rim spoke detection.
When it is established that no information about spokes
is needed, in-depth spoke detection by the laser can
be switched off.
This noticeably reduces the overall measuring run time.
After the measuring run the condition is identified by
the pair of symbols (2, Fig. 5-38);
- Automatic "BALANCING"
2
- Rim with question mark
5-38
84
Publicidad
