Deltaco Gaming GAM-103-W Manual Del Usuario página 9

Unterstützung
Weitere Informationen zum Produkt
finden Sie unter www.deltaco.eu.
Kontaktieren Sie uns per E-Mail:
help@deltaco.eu
ENG
Thank you for choosing Deltaco!
1. Left stick
2. – button
3. Screen capture button (Take
screenshot and record video)
4. "Home" button
5. + button
6. Y button
7. X button
8. A button
9. B button
10. Right stick
11. 3.5 mm audio port
12. Turbo button
13. LED indicators 1, 2, 3, 4 counting
down to up
14. Direction pad
15. ZR button
16. R button
17. L button
18. ZL button
19. USB-C charge port
20. Connection button
Vibration
The controller has 2 built-in vibration
motors.
3.5 mm
Use the 3.5 mm stereo connection to
connect a microphone, headphones,
or a headset.
Connect to "Switch"-console
Connect the controller via the
console's system. Depending on the
language and version of the system,
the menu might look different, but it
should be something like this:
Press the "Home"- button from main
screen -> Controllers -> Change
Grip/Order.
Press and hold the connection button
(20) for about 4 seconds to connect.
The 4 LED lights will flash quickly
(release the button).
Follow the instructions on the screen
to connect.
Disconnect ("Switch")
Press and hold the "Home" button for
about 3 seconds to disconnect. The
controller will enter sleep mode.
Troubleshooting ("Switch")
Make sure airplane mode is off. Try to
delete the information for this
controller from ->controllers and
sensors. Try to reconnect.
Calibrate control stick (Switch)
1. Press the "Home"- button from
main screen -> System settings ->
Controllers and sensors -> Calibrate
control sticks.
2. Follow the instructions on the
screen to calibrate.
1