Do not leave anyone in the room until the qualified service technician has arrived and
recommends that it is safe to return to the room.
Naked flames, cigarettes or other possible sources of ignition must not be used inside or near
the unit.
The components are designed for propane, so as to be non-igniting and non-sparking.
Individual parts may only be replaced with identical repair parts.
FAILURE TO OBSERVE THIS WARNING MAY RESULT IN EXPLOSION, DEATH, INJURY AND
PROPERTY DAMAGE.
1.1 SAFETY PRECAUTIONS DURING MAINTENANCE AND REPAIR
This unit does not contain any components inside that can be repaired or maintained by lay
individuals. The entire refrigerant circuit is a hermetically sealed system and may only be
maintained and repaired by companies specialising in refrigeration and air conditioning
technology.
1.2 RESIDUAL RISKS
Danger of natural refrigerant – propane (R290)!
H220 – Extremely flammable gas.
H280 – Contains gas under pressure; may explode if heated.
P210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking.
P377 – Leaking gas fire: Do not extinguish unless leak can be stopped safely.
P410+P403 – Protect from sunlight. Store in a well ventilated place.
Warning – electrical voltage
Before carrying out any work on the unit, remove the mains plug from the mains socket!
Unplug the power cable from the mains socket by taking hold of the mains plug.
Warning – electrical voltage
Work on electrical components may only be carried out by an authorised specialist company!
Warning
Dangers can arise from this unit if it is used improperly or for an unintended purpose by untrained
individuals! Observe the staff qualifications!
Warning
The unit is not a toy and should not be handled by children.
Danger of suffocation!
Do not leave the packaging material lying around carelessly. It could become a dangerous toy for
children.
2.0 PRECAUTIONS FOR OPERATION
WARNING! To reduce the risk of fire, electric shock or injury to persons or property, observe the
following:
If the power cord is damaged, it must be replaced by the manufacturer, its Customer Service
Team or similarly qualified individuals to avoid any danger.
The unit must be disconnected from the power source during maintenance.
Always operate the unit from a socket with the same voltage, frequency and power as indicated
on the rating plate.
Always insert the mains plug into a properly fused mains socket.
22
www.DEUBAXXL.de