Publicidad
Idiomas disponibles
Idiomas disponibles
13
Low/high fan speed indicator.
4.3 SETTINGS
4.3.1 SWITCHING ON AND OFF
In standby mode: Touch the MODE button to switch on the unit. The operation indicator lights
up, the default fan speed is high and the default humidity is 50 %.
In power-on state: Touch the MODE button to switch off the unit. The status indicator goes out,
the compressor switches off immediately and the fan switches off with a delay of 30 seconds.
4.3.2 OPERATING MODE
MODE button
Touch the MODE button to switch between automatic, drying and sleep mode.
Automatic mode: When the ambient humidity is ≥ +3 % of the set humidity, the fan starts working
and the compressor starts after 3 seconds. When the ambient humidity is ≤ the set humidity of -
3 %, the compressor switches off and the fan switches off after a delay of 30 seconds.
Both the fan speed and the humidity can be set in automatic mode.
Drying mode: In this mode, the unit runs continuously at high fan speed. The fan speed is
adjustable, the humidity cannot be adjusted.
Sleep mode: In sleep mode, the target humidity is 60% and after 10 seconds of no operation, all
other indicator lights and the screen are turned off except for the sleep mode indicator light, the
operation indicator light and the child lock indicator light. If the humidity in the room is ≤ 57 %
RH, the compressor and the fan are switched off.
If the humidity in the room is ≥ 63 % RH, the fan and compressor will start operating. In sleep
mode, when the water tank is full, the machine will not go into alarm, but the full water tank
indicator will light up (red colour) to remind you that the water tank is full and you need to empty
the water tank.
TIMER button
Touch the TIMER button to set the timer function from 00 - 24 hours. Display field "88" flashes
and shows the timer hour, touch the HUM button, the value increases by 1 hour, the value is
displayed on the screen "88".
Set the time to "00" to deactivate the timer function.
SPEED button
High/low fan speed: Touch the button once to switch, then the corresponding indicator lights up.
In continuous drying mode and during the defrost phase, the fan speed cannot be changed.
Lock indicator
Long press the LOCK button to switch the child lock function on or off.
Alarm when water tank is full
Water tank indicator: Once the tank is full, the alarm is triggered after 5 seconds. The water tank
indicator lights up red and the unit buzzes 5 times.
Exit alarm: Touch any button to stop the alarm. The compressor and the fan switch off and all
functions remain until the tank is emptied and returned to the correct position.
27
www.DEUBAXXL.de
Publicidad
