Descargar Imprimir esta página

Power Probe INT500 Manual Del Usuario página 24

Publicidad

INT500
Insulation test: Tester can perform at least 1100 insulation tests
with new alkaline batteries at room temperature.
These are standard tests of 1 MΩ at 1000 V with a duty cycle
Installation Category : IEC/EN 61010-1, IEC/EN 61010-2-034
Compliance to EN 61557 : IEC/EN 61557-2
EMC : EN 61326-1
CAT
It is applicable to test and measuring circuits connected
II
directly to utilization points (socket outlets and similar
points) of the low-voltage MAINS installation.
It is applicable to test and measuring circuits connected
III
to the distribution part of the building's low-voltage MAINS
installation.
It is applicable to test and measuring circuits connected at
IV
the source of the building's low-voltage MAINS installation
Environmental Conditions
Indoor Use
Pollution degree : 2
Operating altitude : 2000m (6562ft)
Operating temperature :
Non-condensing <5°C, 5°C ~ 30°C ( ≦ 80% RH),
30°C ~ 40°C ( ≦ 75% RH), 40°C ~ 50°C ( ≦ 45%RH)
Storage temperature :
-20°C to 60°C , 0 to 80% R.H. (batteries not fitted)
Temperature Coefficient :
0.15 x (Specified accuracy) /°C, < 20°C or > 26°C .
IP Rating : IP40
Shock vibration : Random Vibration per MIL-PRFF Class 2
Drop Protection : 4 feet drop to hardwood on concrete floor.
IEC/EN 61557-4
Application field
23
EN

Publicidad

loading