Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
WARNING
•
DO NOT suspend any fixture by the house wires. A fixture must always be mounted directly to a
mounting strap which is first attached to the outlet box. Wire connectors will not support the weight
of a fixture. Suspending a fixture by the house wires and wire connectors will result in the fixture
falling, with the possibility of personal injury and the danger of electrical shock or fire.
•
To reduce the risk of fire, electrical shock, or personal injury, wire connectors provided with this
fixture are designed to accept only one 12-gauge house wire and two lead wires from the light
fixture. If your house wire is larger than 12-gauge or there is more than one house wire to connect
to the corresponding fixture lead wires, consult an electrician for the proper size wire connectors to
use.
• If applicable, always unplug this product before replacing bulb.
• To reduce the risk of electric shock, DO NOT use the product if power cord is frayed or broken.
• To reduce the risk of damage to the fixture, DO NOT use power tools to
fixture.
•
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN
THE OTHER) AS A SAFETY FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG
WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF IT DOES NOT FIT FULLY IN THE OUTLET,
REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. NEVER
USE WITH AN EXTENSION CORD UNLESS THE PLUG CAN BE FULLY INSERTED. DO NOT ALTER
THE PLUG
CAUTION
•
TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by
removing the fuse (or switching the circuit breaker off).
•
If you are not sure the lighting system has a grounding means, DO NOT attempt to install this
fixture. Contact a qualified, licensed electrician for information regarding the proper grounding
methods as required by the local electrical code in your area.
•
All fixtures must be mounted to an outlet box that is supported by the building structure.
•
DO NOT use bulb having a wattage greater than the maximum value stated on the fixture. The use
of a bulb with higher wattage than specified will increase temperatures and risk of fire.
•
If a dimmer control switch is used with this fixture, obtain professional advice to determine the
correct type to use as well as the electrical rating required.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly (not included): Flathead Screwdriver, Phillips Screwdriver, Wire
Strippers, Pliers, Wire Cutters, Safety Glasses, Stepladder, Electrical Tape, Silicone Weather
Sealant, Level
Helpful Tools (not included): A/C Tester Light, Do-It-Yourself Wiring Handbook, Soft Cloth
4
assemble any part of the
light
Publicidad
