Publicidad
Idiomas disponibles
Idiomas disponibles
GB
ENGLISH
• Never mount any metal cutting elements.
• Connection and extension cables should be kept away
from the cutting device to avoid damage which could
lead to contact with live parts.
• The ON/OFF switch and safety switch must not be
locked.
Stop the device and disconnect it from the power supply
- whenever you leave the lawnmower
- before removing blockages
- efore checking, cleaning or working on the device
- after contact with a foreign object, to check the device
for damage
• If the appliance starts abnormally vibrating, switch the
MAINS CONNECTION
DANGER!
Operation is only allowed with a safety switch against stray
current (RCD max. stray current of 30mA).
• Before use check machine, cable, and plug for any dama-
ges or material fatigue. Repairs should only be carried
out by authorised Service Agents.
• Insert the plug of the electrical cable in a socket of
suitable shape, voltage and frequency complying with
current regulations.
• Keep the connection and extension cables away from
dangerous moving parts to avoid damaging them.
Only use splash proof extension cables approved for
outdoor purposes. The stranded wire cross-sectional
area of the extension cable must be at least 1.5 mm
for cables up to 25 m and 2.5 mm
25 m.
• Only plug-in when machine is switched off.
• If necessary, please consult your electricity company to
SYMBOLS
Warning/caution!
WARNING! Please read the instructions careful-
ly before starting the machine.
Wear eye protective goggles !
Wear ear protectors!
Unplug immediately if the power cord or
plug becomes damaged !
12
2
for cables above
2
engine off and search for the cause immediately. Gene-
rally, vibrations are a warning against operating failure.
• When being blocked, turn the appliance immediately off
and remove the jammed item.
• Carry the implement by the handle with the tines stati-
onary (idle). Careful handling of the device reduces the
risk of injury from tines.
• The appliance must be stored in a dry place and pro-
tected from frost.
• Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.
ensure that the continuous current carrying capacity
of the mains at the connection point is sufficient for
connecting the device.
• Use the special cable holder (strain relief) for the con-
nection of the extension cable.
WARNING
WARNING! Electric shock! There is a risk of an injury
caused by electric shock!
Do not use the device if the cable or plug is damaged or
worn.
If the cable is damaged during use, it must be discon-
nected from the mains supply immediately. Do not touch
the cable until it has been disconnected from the mains.
Do not connect a damaged cable to the power supply
and do not touch a damaged cable before disconnecting
it from the power supply, as damaged cables can lead to
contact with active parts.
Warning against thrown-off items
Do not let other persons get near due to fo-
reign objects being thrown off. Minimum safe
distance is 15 m.
Warning! Keep your hands and feet well clear
of the blades
Protection class II
IPX4 Degree of protection against water
Publicidad
