IKRA IET 1030 Nstrucciones De Manejo página 24

GB ENGLISH
STORAGE - TROUBLESHOOTING
• The appliance should be stored in a dry and clean room
and out of reach of children.
• During extended periods of storage, during the winter
DISPOSAL
• If your device should become useless somewhere in the
future or you do not need it any longer, do not dispose
of the device together with your domestic refuse, but
dispose of it in an environmentally friendly manner.
• Please dispose of the device itself at an according
collecting/recycling point. By doing so, plastic and
metal parts can be separated and recycled. Information
Problem
Motor does not start
Abnormal noises
Abnormal vibrations
Poor scarification results
14
for example, ensure that the appliance is protected
against corrosion and frost
concerning the disposal of materials and devices are
available from your local administration.
Possible causes
No electricity
Defective cable
Defective safety switch/plug com-
bination
Overheat protection actived
Blade is jammed
Lubrication running out
Loose bolts, nuts or other securing
components
Blades damaged or worn
Working depth too large
Working depth too small
Worn blades
Remedy
Check mains connection
Check cable, plug in, replace if
required, or have it repaired by a
qualified person
Arrange for repair in a specialist
workshop
1. Working depth too large, set to
the shorterdepth
2. Blades blocked, remover the
blockage
3. Soil too hard, select correct work
depth andforwards and backwards
several times whileslowly down the
operation speed.wait till the motor
cool down for around 15 minutes
before rework
Switch off wait till complete stop.
Remove the objects
Arrange for repair in a specialist
workshop
Tighten all components, contact
specialist workshop
Replace or have it checked by an
specialist workshop
Set to correct working depth
Set to correct working depth
Replace or have it checked by an
specialist workshop