STEP 5 Connect the drain hose
5. Open the water taps, and check for
leaks.
To a Laundry Tub or Drain Pipe
1. Check the height (A) of your drain
system and make sure the minimum
and maximum heights shown below are
met.
Minimum
Maximum
NOTE
• Make sure to measure the height from
the floor where the washer is placed.
• Draining efficiency may be reduced if
the drain system is at the maximum
height.
• To prevent the washer from siphoning
water, do not use a drain system below
the minimum height.
2. Attach the drain hose to the plastic
hose guide (B) .
18 in. (46 cm)
96 in. (245 cm)
English 27