ENGLISH
Service
Any improper use, or use not in
accordance with the instructions
for use, may cause danger, voiding
the warranty and the manufacturer's
liability.
Description
A - Digital display
B - Inner grille
C - Handle
D - Basket
E - Air outlet
F - Cable
CONTROL PANEL
1 - Temperature/time indicator
2 - "-" button.
3 - "+" button.
4 - Temperature/time selector
5 - Start/pause button
6 - "Delay" function
7 - Menu selector
8 - Menus (in order):
Potatoes
Bacon
Chicken thighs
Steak
Egg tarts
Shrimp
Fish
Muffins
Pizza
Vegetables
If your model does not have the
accessories described above, they
can be purchased through our
website www.mellerware.com or by
contacting our customer service
team.
Instructions for use
NOTES BEFORE USE
-
Make sure that you have removed all
packaging material from the
product.
Before using the product for the
-
first time, clean the parts in contact
with food as described in the
Cleaning section.
-
During the first use it is normal for
the appliance to give off a slight
plastic odor. This does not affect
the operation of the appliance.
-
Leave a minimum of 50 mm of
space around the appliance when it
is to be used.
-
Place the appliance on a stable
horizontal surface. Do not place the
appliance on surfaces that do not
withstand heat.
USE
-
Grasp the handle of the basket and
carefully pull it out of the fryer by
pushing it outwards.
-
Place the food inside the basket, on
top of the inner grid.
-
Replace the basket with the food
inside the fryer.
-
Note: The appliance will not operate
until the basket is completely
closed inside the fryer.
-
Completely unwind the appliance
cable before plugging in.
-
Plug the unit into the mains.
As soon as the unit is plugged in, 1
beep sounds, indicating that the
unit is switched on and the
start/pause button (5) lights up.
-
To activate the digital display, press
the start/pause button (5).
When the start/pause button (5) is
pressed, a beep sounds and the
digital display lights up.
MANUAL MODE
-
Once the ingredients are in the
basket and the fryer is plugged in,
set the time and temperature using
the temperature and time selector
(4).
-
Adjust the temperature and time
with the +/- buttons.
EN