Package Contents; Getting Started - Akasa Integral Fusion Manual De Uso

Package contents

• INTEGRAL FUSION quad interface enclosure
• A-male to B-male USB2.0 cable (.5M)
• -touch backup software
• Footstand (Mounting )
• DC 2V power adapter
• User's Manual
• Installation kit for installing hard drive

Getting started

To install your new Integral Fusion enclosure you will
need:
• Hard Disk Drive (HDD) (not included)
• Philips-head screw driver (not included)
• Mounting screws (included)
• USB2.0 Data Cable (included)
• DC 2V power adapter
Hard disk installation
1
Remove the two rubber cushion inserts on the sides of the
enclosure.
2
Undo with cross head screw driver the four screws (2 upper on
each side)
2
fusion
3
Ensure that the Drive select feature on the drive is set to single/
master and connect up the IDE and Power connectors to the
drive.
4
Place the drive into the enclosure and secure it with the four
screws (2 on each side).
5
Locate the top cover back over the enclosure and fit the four
screws (2 upper on each side)
6
Refit the two rubber cushion inserts on the sides of the
enclosure