Akasa Integral Fusion Manual De Uso página 6

6. After the backup process is finished, the back up files will
appear on the right side of the FileSync widow (D on picture ).
7. All the settings are saved automatically. To deselect files you
no longer want to backup you need to drag them from the
right box of the FileSync (D on picture ) onto the bin icon (E on
picture ).
Next backup
After the First Time Backup any subsequent backup operation
could be activated by pressing the "one touch backup" button.
The One Touch Backup function will auto backup previously
selected backup source and FileSync window will appear as a
confirmation.
NOTE: Alternatively Backup/Synchronization can be started
manually from the FileSync window (buttons K and L on picture
).
Periodic backup
The Fusion enclosure includes the periodic backup function.
. To set up the periodic backup you need to set the interval
between the backups. To set the interval press the "Set backup
time" button (F on picture ) and set the period between the
backups.
NOTE: The time between the backups can be set from  minute
to every 0 days.
fusion
2. To launch the periodic backup press the "Execute periodic
backup" button (G on Picture ) and confirm when prompted.
. All settings are automatically saved. You can check the
remaining time to the next backup on the status bar (H on
Picture ).
NOTE: Restarting the system, switching off the enclosure or
closing down the FileSync window (I on Picture ) will require
re-executing the periodic backup. FileSync window can be
minimized (J on the picture ) without affecting the periodic
backup.
Synchronize
Synchronization is the two-way process of making sure that two
or more locations contain the same up-to-date information.
If you add, change, or delete a file from one location, the
synchronization process will add, change, or delete the same file
from the other location.
• Files updated/changed in one location will overwrite older
version in the other.
• Files deleted from one location will be re-added from the
other location.
To synchronize your backup with the source files press the
"Synchronize" button (K on picture )
5