System Setup - Akasa Integral Fusion Manual De Uso

System setup

Drivers
Windows XP/200/2000 above do not need any drivers to run
the enclosure.
One touch backup software
1
) Connect the Fusion to the PC and switch on.
2) Insert the software CD then the above screen appear.
) Install the "GPIO" software first and then install the
"FileSynch" software.
First time backup
A
B
C
L
K
H
M
. Press the one touch backup button. The FileSync window
will appear with a warning pop-up window "NO backup folder
setting".
NOTE: Do not press the "One Touch Backup" until the GPIO
manager icon shows up on the system

fusion
Picture 1
tray.
2. From the drop down menu [A on picture ] choose the local
drive containing the data you want to backup.
. You can set the backup source by dragging the whole drive/
folder (B on picture ) or single file (C on picture ) from the left
to right side of the FileSync window.
NOTE: The backup path is automatically set to the:
[\AutoBackUp\Data] on the Fusion HDD and cannot be changed.
To select more than one file press and hold CTRL key. You can
build the source path by adding more folders from different
drives.
I
J
F
D
. The following dialog box with  options appears:
• Replace all – will do the backup of the entire selected drive/
folder.
• Choice – will list all files from the selected drive/folder to
choose from.
• Synchronize – will synchronize the backup source and the
target.
E
G
5. Select the option you need
with the OK button
progress of the backup on the status bar (M on picture ).
and press OK button. Confirm
when prompted. You can check the