Linsar E-3021C Manual Original página 54

WARNING!
Faulty electric installation or excess mains voltage can cause an
electric shock.
- Only connect the power cable if the mains voltage of the socket
matches the information shown on the rating plate.
- Only connect the power cable to an easily accessible socket so
that you can quickly disconnect it from the mains power in the
event of a malfunction.
- Do not use the device if there is visible damage or if the power
cable is defective.
- If the power cable of the device is damaged, it must be replaced
by the manufacturer, the manufacturer's customer service or a
similarly qualified person in order to prevent hazards.
- Do not open the device. Leave repairs to a qualified service
technician. Contact the service address indicated on the
warranty card. Liability and warranty claims are excluded if you
carry out repairs yourself, improperly connect the device to the
power supply or operate it incorrectly.
- Only parts that match the original device data may be used for
repairs. This device contains electrical and mechanical parts
that are essential for protection against sources of danger.
- Do not operate the device with an external timer or a separate
remote control system.
- Do not immerse the device or the power cable in water or other
liquids.
- Never touch the power plug with wet hands.
- Never pull the power cable out of the socket by the cord; always
grip the plug instead.
- Never use the power cable as a carry handle.
Risk of electric shock!
54