earbreeze EBD.111 Manual De Operación página 21

1. To turn on the device, press the ON/OFF
button �� and release it. During the
following warm-up phase the ON/OFF
button flashes �� blue and the device
vibrates.
When the device is warmed up, the
ON/OFF button �� shines a constant
green. The device starts running at the
slowest speed level.
2. Start the drying process by placing the device with its
earpiece close to or in the outer ear canal. Only insert
the earpiece as far as it feels comfortable for you.
The device stops automatically after 45
seconds. To start another application, briefly
press the ON/OFF button �� again.
Changing Air Velocity
For optimal individual drying, you can choose between three air speeds.
The selection of the next higher speed level is done by pressing the ON/OFF
button ��.
The speed levels are also visually displayed via the ON/OFF button ��:
slow: ON/OFF button �� shines a constant green
▪
medium: ON/OFF button �� flashes green
▪
fast: ON/OFF button �� quickly flashes green
▪
When the ON/OFF button �� is pressed in the fastest stage, the device turns off.
To start another application, briefly press the ON/OFF button �� again.
21
EN