FITFIU FITNESS BESP-150 Manual De Usuario página 34

04
The next step is to attach the handle frame (6) to the handle
post (5) using flat washers (17), spring washers (21) and socket
head cap screws (20). Secure with an Allen key (27).
Install the saddle adjustment frame (7) on the saddle frame (4),
and secure it with a flat washer (19) and an adjustment nut (15).
Remember to loosen the adjusting nut (15) to move the seat
adjustment frame (7) forward and backward as needed. Do not
forget to tighten the adjusting nut (15) before use.
05
34
EN - BESP-150
Now, take the monitor bracket (10) and fasten it to the handle
frame (6) using the self-tapping screw (24). Secure it firmly
with the hexagon socket spanner (27). Next, mount the
monitor (9) on the monitor bracket (10). Connect the pulse
cable (22) to the "pulse" hole on the back of the monitor (9),
and the signal cable (23) to the "sensor" hole also on the back
of the monitor (9).
Finally, install the mobile phone holder (11) on the handle frame
(6). Remember: before using the machine, make sure that all
parts are tight and firm, and that the machine is stable on the
ground. Ready to use!